M5 16mm
screws
x 4
Tools you will need
To put your kaboodle kitchen waste bins together you will need the following tools.
Hardware included
14mm
wood screws
x 4
E
F
C
I
D
J
B
H
A
G
Cordless drill with:
• Number 2 screw tip
• 2mm drill bit
Tape
measure
Adjustable
square
Clamps
(optional)
Spirit level
(optional)
Screw
driver
Safety
gear
Pencil
M5 8mm
screws
x 2
p.
1
Ver. 2
W-50530
Things you need to know
M6 16mm
screws
x 2
Follow these
instructions to
install your parts
and accessories.
• Always read the full instructions prior to installation.
• Consider possible obstructions to your parts & accessories,
like hinges inside the cabinet or adjacent cabinet doors and
handles, prior to installation.
• Make sure you leave plumbing and electrical work
to qualified trades people. Never try this yourself.
• Make sure you always use safety gear like a mask, ear muffs
and glasses when using tools.
• Tip
: After marking out the pre-drill holes as per the
instructions, take the part that is to be installed and align
the appropriate holes with the markings to ensure they
match up prior to pre-drilling the holes.
• If you have any questions, contact us on:
Australia:
1800 666 078
Monday to Friday between
8:00am and 6:00pm AEST, New Zealand:
0800 522 663
Monday to Friday between 8:00am and 5:00pm NZST
or email:
info@kaboodlegroup.com.au
.
2x11L
side mount pullout bin
step 2
runners
x 1 pair
m4 8mm
screws
x 4
door
brackets
x 2
bin
frame
x 1
16mm
wood screws
x 12
lid
brackets
x 2
installation guide
