st
ep 2
p.
2
hanging kitchen storage
step 1.
step 3.
step 2.
step 4.
Use the two accessory screws to fix
the wall brackets to the end of the rail.
Using an 8mm drill bit, pre drill the marked out holes to a
depth of 40mm. Insert the 4 wall plugs into the holes.
Mark out and pre-drill four holes on the wall using the
assembled rail as per the diagram above. Use the level
to make sure rail is straight
Align the assembled rail with the pre-drilled holes
and using the wall screws, fix the rail to the wall.
B
har
dw
ar
e k
e
y
accessory screw
35mm wall screw
wall bracket
wall plug
A
C
B
D
B
A
D
C
Ver. 1.5
