90° angle
bracket
x 1
28mm
wood screws
x 40
50mm
wood screws
x 107
adjustable
legs
x 4
stick on end
caps
x 8
14mm
screws
x 2
E
F
C
D
B
A
step 1
Follow these
instructions to
build and attach
your cabinet.
Cordless drill with:
• Number 2 screw tip
• 4mm drill bit
• Number 12
countersinking drill bit
Adjustable
square
Jigsaw
65mm
wood screw
Safety
gear
Pencil
Tape
measure
Tools you will need
To put your kaboodle kitchen cabinets together you will need the following tools.
Hardware included
Things you need to know
Spirit level
(900mm recommended)
• All cabinets will need to be attached to the wall using a
minimum of 8 gauge 65mm screws if you have a stud wall.
If your wall is concrete, brick or another surface ask your
hardware specialist for advice on the right fixing method.
• Make sure you leave plumbing and electrical work
to qualified trades people. Never try this yourself.
• For extra strength use exterior woodworking glue
when assembling cabinets.
• To help identify panels, counter sunk holes always
face outwards.
• All holes that aren’t already pre-drilled should be drilled prior
to screwing using a No 12 countersinking drill bit.
• Make sure you always use safety gear like a mask, ear muffs
and glasses when using tools.
• If you have any questions, contact us on:
Australia:
1800 666 078
Monday to Friday between
8:00am and 6:00pm AEST, New Zealand:
0800 522 663
Monday to Friday between 8:00am and 5:00pm NZST
or email:
info@kaboodlegroup.com.au
.
p.
1
Ver. 9
W-51617
Clamps
(quick release)
Wall fixing
(If necessary)
450mm
4 drawer cabinet
