Hardware included
28mm
wood screws
x 25
B
door
buffer
x 4
F
E
stick on end
caps
x 9
90° angle
bracket
x 8
D
C
adjustable
legs
x 5
50mm
wood screws
x 41
A
65mm
wood screw
Tools you will need
To put your kaboodle kitchen cabinets together you will need the following tools.
Pencil
Cordless drill with:
• Number 2 screw tip
• 4mm drill bit
• Number 12
countersinking drill bit
Tape
measure
Wall fixing
(If necessary)
Adjustable
square
Clamps
(quick release)
Safety
gear
Spirit level
(900mm recommended)
step 1
Follow these
instructions to
build and attach
your cabinet.
Things you need to know
p.
1
Ver. 9
W-70105
• All cabinets will need to be attached to the wall using a
minimum of 8 gauge 65mm screws if you have a stud wall.
If your wall is concrete, brick or another surface ask your
hardware specialist for advice on the right fixing method.
• Make sure you leave plumbing and electrical work
to qualified trades people. Never try this yourself.
For extra strength use exterior woodworking glue
when assembling cabinets.
• To help identify panels, counter sunk holes always
face outwards.
• All holes that aren’t already pre-drilled should be drilled prior
to screwing using a No 12 countersinking drill bit.
• Make sure you always use safety gear like a mask, ear muffs
and glasses when using tools.
• If you have any questions, contact us on:
Australia:
1800 666 078
Monday to Friday between
8:00am and 6:00pm AEST, New Zealand:
0800 522 663
Monday to Friday between 8:00am and 5:00pm NZST
or email:
info@kaboodlegroup.com.au
.
900mm x 800mm
corner base cabinet
