Kabuto Japan FF-5V, Instruction Manual

ENG

ENG-9

CAUTION 

●Do not push or twist the shield by force 

when installing it. Such action may 

damage the shield and ratchet system.

●After the installation of the shield, be sure to pull it lightly towards the 

removing direction to make sure that it is securely installed. 

●After the installation of the shield is completed, open and close the shield 

three to four times to make sure that the shield is properly worked.

How to attach the shield:

a

As shown in 

A

and

B

, align the angles of the shield 

release button and the part 

A

 on the Shield Ratchet, 

and set the mechanical part of the shield on the 

ratchet as shown in 

C

.

b

Insert the shield in the direction of the arrow as far as 

it goes, then the shield can be attached. Follow the 

same procedure to attach the shield on the other 

side.  (

D

The installation of the shield is complete).

WARNING

❷

❶

❸

❹

Same angle

Same angle

Shield Ratchet

Shield Ratchet

Shield

Release button

A

A

Shield

9

Hook on shield 

mechanism

Hook on shield 

mechanism

Cover the Shield 

Ratchet

Hook of Shield 

Ratchet

Hook of Shield 

Ratchet

First, stop at this 

position

Then insert 

the shield in 

the direction 

of the arrow as 

far as it goes

How to attach the shield:

● After the installation of the shield, make sure the shield is securely installed 

   and that it is properly opened and closed before riding. If the shield does 

   not work properly, or is installed insecurely, it may cause a failure in 

   opening and closing the shield or lead to the removal of the shield while 

   riding, thereby causing a great risk. If the opening and closing operations 

   are not properly performed or abnormal noise is heard during these opera

   tions, check the steps in the installation procedure and repeat the installa

   tion procedure from the start.

● The shield is a consumable item. If the shield surface is damaged by a bug, 

   stone, etc., it may hinder the vision, thereby causing a great risk. If the 

   shield gets extremely dirty or scratched, replace it with a new one.

Shield

Release Button

Shield Ratchet

Same angle

Hook on shield 

mechanism

Cover the Shield Ratchet

Hook of 

Shield Ratchet

First, stop 

at this position

Shield

Hook on shield 

mechanism

Hook of 

Shield Ratchet

Then insert the 

shield in the 

direction of the 

arrow as far as 

it goes

As shown in 



 and 



 align the angles of the 

shield release button and the part A on the Shield 

Ratchet, and set the mechanical part of the shield 

on the ratchet as shown in 



.

Insert the shield in the direction of the arrow as 

far as it goes, then the shield can be attached. 

Follow the same procedure to attach the shield on 

the other side. (   The installation of the shield is 

complete).



● Do not push or twist the shield by force 

   when installing it. Such action may 

   damage the shield and ratchet system.

● After the installation of the shield, be sure to pull it lightly towards the 

   removing direction to make sure that it is securely installed.

● After the installation of the shield is completed, open and close the shield 

   three to four times to make sure that the shield works properly.