hy-switch for KACO blueplanet hybrid inverters
Page 17
Securing the component
1.
Insert the screwdriver [ S_1.0] into the central recess between the
cover plate and the plastic hinge and carefully separate the two.
2.
Store the cover plate carefully until installation is complete.
3.
Attach the four dowels with the hole dimensions 153 mm x
247 mm to the mounting wall (cf Fig. 3)
» Component is mounted next to the switch box/control cabinet on the wall.
CAUTION
Avoid damage due to hard striking!
Hard strikes or an uneven surface can damage the
component.
Fig. 3: Hole spacing for mounting
