Operating Instructions Powador-proLOG_EN
Page 5
1 About this
documentation
The following notes guide you through all of the documenta-
tion. Additional documents are applicable in conjunction with
these operating instructions.
1.1 Other applicable documents
When installing the data logger, be sure to observe all assem-
bly and installation instructions for components and other
parts of the system. These instructions are delivered together
with the respective components and other parts of the system.
1.2 Retention of documents
Pass these operating instructions on to the system operator.
The system operator is to retain the documents. The
instructions must be available whenever they are needed.
1.3 Symbols used in this document
When installing the data logger, observe the safety instruc-
tions included in these installation instructions.
High
voltage!
Read the manual
1.4 CE marking
The CE marking is used to document that the Powador-pro-
LOG data logger shown on the name plate fulfi ls the funda-
mental requirements of the following relevant directives:
–
Directive relating to electromagnetic compatibility (Council
Directive 2004/108/EC)
–
Low voltage directive
(Council Directive 2006/95/EC)
1.5 Name plate
The name plate showing the exact designation of the unit is
located on the left side of the housing.
S e c t i o n 1 A b o u t
t h i s D o c u m e n t a t i o n
ATTENTION
Read the manual
We assume no liability for any damage caused by failure
to observe these instructions.
ATTENTION
Failure to observe a warning indicated in this manner may
lead to damage to property.
NOTE
Useful information and notes.
IMPORTANT
Failure to observe this information may result in operat-
ing diffi culty or impaired functionality.
DANGER
Failure to observe a warning indicated in this manner will
lead directly to serious bodily injury or death.
ACTION
This symbol indicates that a certain action is required.
