Wireless (Mini) Sensor:
The KD-DS-5800-MINI wireless door/window sensor is powered by a single CR2032 battery (included). The
device emits RF message signals when the corresponding door or window is opened or closed. Additionally, it
is suitable for concurrent use with compatible Honeywell security systems featuring 345 MHz alarm panels.
For details including features, special considerations, and specifications, refer to the following resource:
https://www.kadtronix.com/downloads/d5800_cut.pdf
LED Indicators:
The sensor contains two (2) multi-color LED indicators which remain enabled for 15 minutes after inserting /
replacing the battery, or indefinitely while the cover is detached. Colors are defined below:
•
Blue – illuminates when the magnet is in proximity; aids installation for optimal placement
•
Green – indicates sensor is transmitting
•
Red – low battery
Color
Meaning
Blue
Active when magnet is within range of the sensor unit (1 inch max).
Green
Flashes when sensor unit transmits.
Red
Upon low battery condition, the indicator flashes once every five seconds, for two
minutes after a RF message transmission.
Installation:
•
Detach front cover from sensor unit
•
Insert battery (CR2032 - included)
•
Mount the device as instructed below:
•
For wood doors, mount the sensor (& magnet) using 3M adhesive backing - included.
•
For metal doors, patio doors, and other metal-framed openings, masking tape is strongly
recommended for temporarily mounting the sensor (& magnet). Using trial-and-error testing,
reposition as necessary until you have confirmed consistent, reliable signal detection at the
controller/receiver. Apply 3M adhesive backing for permanent hold.
Note: Attach sensor unit to the stationary part of the desired opening (typically the door-frame or
window-frame), and attach magnet to the door or window.
•
Verify that the blue test LED illuminates when the door or window is closed (i.e., magnet is near), and
that it extinguishes when the door is opened.
•
Replace cover.
5 of 7
