A
B
SET
▲
▼
▲
▼
▲
▼
▲
▼
▲
▲
A
B
SET
SET
SET
SET
SET
SET
SET
SET
SET
▲
▲
▲
▲
▲
SET
SET
SET
SET
SET
▲
▲
SET
SET
SET
SET
SET
▲
▲
▲
SET
CREATING PROGRAM
Press SET button to access
PROG menu. If the program memory is not full,NEW menu appears on the
screen.
After entering to NEW menu, the first free area of the memory automatically appears on the screen for a while.
With using the direction buttons, the program operation mode is selected as
astronomical or time switch.
+ OFFSET : This parameter is used to adjust the program operation time. OFFSET is added to sunrise
or sunset time
- OFFSET : This parameter is used to adjust the program operation time. OFFSET is subtracted from
sunrise or sunset time
If time program is selected,
hour,minute and second
values are entered.
Sunset or sunrise is selected. As an
option ±OFFSET value could be set.
For related program, desired relay output is selected.
Required contact position is selected as ON or OFF
Monday
If YES is selected, program operation is enabled for flashing day.
If NO is selected, program is not used for flashing day.
This process is repeated for each day of the week.
After making choice for the last day of the week, program could be stored
with selecting SAVE or could be cancelled with selecting EXIT.
DELETING PROGRAM
To access DELETE sub-menus, SET button is
pressed on DELETE screen. It is possible to
clear the whole program memory with selecting
ALL menu. For deleting a single program,
related program should be chosen.
With using ▲ button in PROG submenus, DELETE menu is reached.
For confirming delete operation SET button is pressed on YES screen
Pressing SET button on NO screen cancels the delete operation .
Astronomical mode
Time mode
SET
SET
If ALL is selected, program operation is enabled for every day.
If SELECT is selected, program operation is enabled for desired days.
A
B
Erased
SET
A
B
Monday
