KCH Series Hand-type Ultrasonic Plastic Welding Machine
Weihai Kaer Sonic Power Co., Ltd. www.kaer-welder.com info@whkcs.com
- 4 -
2. Equipment normal operating instruction
When the equipment has installed and commissioning, operator holds the hand-type
welding head with one hand, after adjusting the welding head relative to workpiece
position, force’s strength and direction, to press the control handle
，
and the
equipment will send ultrasonic as pre-setting welding time to complete welding
process.
III. Main
Technical
Parameters
1. Operating Power supply: single-phase AC220V±5%
2. Operating current: less than 1A
3. Apparent power of transducer:
□
500W
□
800W
□
1000W
4. Ultrasonic frequency: 28KHz
5. Power supply noise: do not exceed 100Vp_p
6. Allowed momentary interruption: less than 10ms
7. Operating temperature: 0
～
50
℃
8. Equipment storage temperature: -10
～
60
℃
9. Ambient humidity: 20
～
70%(non-condensation)
10. Around no vibration existing
11. Around no dust and no corrosive gas
12. Equipment overall dimension:
400mm
（
L
）
×450mm
（
W
）
×150mm
（
H
）
