2. Pull on the parking brake.
3. Detach the breakaway cable.
4. Wind down the jockey wheel.
5. Place chocks under the wheels.
6. Pull up the parking brake to the stop.
7. Uncouple the compressor from the towing vehicle.
■ Pull up the coupling release lever.
■ Lift the coupling off the towing hitch ball.
The gas spring automatically increases parking brake force if the machine rolls backwards or
when parked on a slope.
Carry out the following when parking the compressor
When parking on a slope, securely chock the machine before uncoupling.
Fig. 50 Safety sign - secure the chocks
1. WARNING!
Machine without parking brake.
Serious injury or death can result from an unchocked machine rolling away.
➤ Securely chock the machine before uncoupling.
➤ As a general rule, the machine should always be chocked when it is not being moved.
➤ The machine should not be manoeuvred by hand.
2. Wind down the jockey wheel.
3. Place chocks under the wheels.
4. Dismantle the lighting and signalling system.
5. Uncouple the compressor from the towing vehicle.
■ Pull up the coupling release lever.
■ Lift the coupling off the towing hitch ball.
12.2.2.1 Option sf
Using the anti-theft device
CAUTION
Machine damage due to excessive static load on the axles
➤ Never place an excavator bucket as anti-theft protection on the machine's enclosure.
Use only the safety chain (available as option) to secure a parked machine against theft.
12 Decommissioning, Storage and Transport
12.2 Transporting
200
Service Manual Screw Compressor
M43
No.: 9_9432 02 E
Option sa, sh
RAMIRENT
All manuals and user guides at all-guides.com
