Assembly:
Task
Daily
A250
A500
A1000
A1500
A3000
See Chapter
Note
Have all lines to and from the
exhaust gas recirculation sys‐
tem checked.
X
KS; SW
KUBOTA
Compressor:
Check compressor air filter
maintenance indicator.
X
Check cooling oil level.
X
Clean compressor oil cooler.
X
Replace the dirt trap in the oil
separator tank valve unit.
X
Clean/check the dirt trap in oil
separator tank valve unit.
X
Clean the primary filter element
of the compressor air filter, re‐
place if necessary.
X
Replace the primary filter ele‐
ment in the compressor air filter.
X
Replace the secondary filter ele‐
ment in the compressor air filter.
X
(2)
Change cooling oil.
X
Replace compressor oil filter.
X
Replace oil separator cartridge.
X
Safety functions:
Check EMERGENCY STOP
push button.
X
Have EMERGENCY STOP
push button tested.
X
KS; SW
Have safety relief valve(s)
checked.
X
KS
Have excess temperature safety
shutdown tested for proper func‐
tion.
X
KS
Gull-wing doors:
Service rubber sealing strips.
X
Check the “gull-wing doors
closed” function.
X
Check connection elements.
X
KUBOTA = Is serviced by a representative from the engine manufacturer (Kubota Corporation)
KS = Contact KAESER SERVICE; SW = Contact Specialist Workshop
DPF = Diesel Particulate Filter
10 Maintenance
10.3 Following the maintenance plans
98
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M55 PE SIGMA CONTROL SMART pV
No.: 902366 10 USE
