2 Technical Data
2.1 Nameplate
The machine's nameplate contains the model type and important technical information.
The nameplate is located on the outside of the machine (see illustration in chapter 13.1).
➤ Enter the data from the nameplate here as a reference:
Feature
Value
Portable rotary screw compressor
Material no. / Serial no.
Actual total weight
Lifting point load capacity
Rated power
Rated engine speed
Maximum gauge working pressure PS
Tab. 3 Nameplate
2.2 Vehicle identification number
The vehicle identification number (VIN) is the only unmodifiable and therefore the most important
identification feature on the machine.
The vehicle identification number remains associated with the machine throughout the entire dura‐
tion of its service life. The vehicle identification number is stamped into the bodywork of the ma‐
chine.
Further information For the location of the VIN stamp, see chapter 13.1.
2.3 Options overview
A list of the options built into your machine helps to correlate the information in this Operating Man‐
ual.
Available options are listed on the options label (option: code letters).
This label can be found:
■ on the outside of the machine.
■ see chapter 13.1.
Only the codes for those options fitted appear on the options label!
Options fitted:
2
Technical Data
2.1
Nameplate
4
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M55 PE SIGMA CONTROL SMART pV
No.: 902366 10 USE
