Damage to the machine can be caused by water or steam jets!
Direct water or steam jets can damage or destroy electrical components and indicator
gauges.
➤ Cover up electrical components such as the control cabinet, alternator, starter, and in‐
struments.
➤ Do not direct water or steam jets at sensitive components such as the control cabinet.
➤ Deploy the extension pole of the pressure washer at a distance of at least 20 inches and
an approximately 90° angle to the cooler/radiator surface.
Improper cleaning with hard objects!
The compressed air aftercooler will be damaged.
➤ Do not clean the compressed air aftercooler with hard objects.
➤ Comply with all instructions!
10.12.1.1 Cleaning the compressed air aftercooler
Fig. 66 Cleaning the compressed air after-cooler
1
Compressed air aftercooler
2
Cleaning direction for water or steam jet
Cover the intake openings of both air filters
➤ Cover the intake openings of both the engine and compressor air filters.
Cleaning the compressed air aftercooler
➤ Clean the cooler blades with compressed air, water or steam jet in the opposite direction of the
cooling air flow.
Remove the protective coverings from the two air filters
➤ Remove the covers from the intake openings of both the engine and compressor air filters.
10 Maintenance
10.12 Maintenance for Optional Items
No.: 902366 10 USE
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M55 PE SIGMA CONTROL SMART pV
161
