Fig. 67 Clean the dirt trap
1
Compressed air aftercooler
2
Water separator
3
Dirt trap
4
Condensate hose line
5
Reducer
6
Strainer
7
Male stud fitting
8
Nozzle
9
Condensate hose line union nut
➤ Follow all instructions carefully.
Removing the dirt trap
1. Loosen the union nut
9
.
2. Remove union nut and condensate hose line
4
.
3. Use a screwdriver to unscrew the nozzle
8
.
4. Remove the nozzle from the male stud fitting.
5. Loosen and remove the male stud fitting
7
.
6. Pull off the strainer
6
.
Cleaning the components
➤ Clean the nozzle, strainer and male stud fitting with cleaning solvent or spirit.
Checking the components
➤ Check the nozzle and strainer for wear.
Components are damaged or show signs of wear.
➤ Replace components.
Installing the dirt trap
1. Position strainer in the male stud fitting.
2. Install the male stud fitting.
3. Position the nozzle in the male stud fitting.
4. Use a screwdriver to tighten the nozzle.
10 Maintenance
10.12 Maintenance for Optional Items
No.: 902366 10 USE
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M55 PE SIGMA CONTROL SMART pV
163
