■ EMC directive
■ Directive on environmental noise
In machines requiring a national road traffic permit, remodeling or modifications may adversely af‐
fect their approval for road traffic.
■ Exhaust emission limits may not be met.
■ The prerequisites for approval are no longer given.
Remodeling or modifications restrict the service work that can be performed for you (examples):
■ Warranty (if directly and originally affected by the remodeling or modification)
■ Reduced replacement part supply (scope, delivery times)
■ SIGMA CONTROL SMART:
Program changes result in a reduced capability of software updating.
3.12 Environmental protection
The operation of this machine may cause dangers for the environment.
➤ Do not allow operating fluids/materials to escape into the environment or into the sewage sys‐
tem!
➤ Store and dispose of operating fluids/materials and replaced parts in accordance with local en‐
vironment protection regulations.
➤ Observe relevant national regulations.
This applies particularly to parts contaminated with fuel, oil, coolants, reduction agents and
acids.
For the emission output of the corresponding engine class to always comply with applicable
requirements, the drive engine must only be operated, used and maintained in accordance
with instruction provided to the end user.
Do not intentionally manipulate the engine management of the drive engine or operate it im‐
properly or carry out deficient maintenance measures.
Intentional manipulations of the emission reduction system and its improper operation, espe‐
cially deactivation or deficient maintenance of the exhaust gas after-treatment system or indi‐
vidual exhaust gas after-treatment components are not permitted.
Possible exhaust gas after-treatment components (if provided):
■ Components for the reduction of particle emission
─ Diesel oxidation catalytic converter
─ Diesel particulate filter
■ Components for the reduction of nitrogen oxide emissions
─ SCR catalytic converter with reduction agent addition
3
Safety and Responsibility
3.12 Environmental protection
No.: 902366 10 USE
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M55 PE SIGMA CONTROL SMART pV
35