1. Loosen and remove the fuel tank cap.
2. Insert the diesel fuel nozzle into the filler port.
3. Activate the nozzle.
Refueling begins.
4. Wait until the maximum fill level of the fuel tank has been reached.
Sufficient expansion volume remains.
5. Shut off and remove the fuel nozzle.
6. Close the filler port with the cap.
Dispose of any spilled fuel and fuel-contaminated working materials in accordance with appli‐
cable environmental regulations.
Preparing for operation
1. Connect the negative cable to the battery.
2. Close the enclosure.
8.3.3 Filling the fuel tank on a construction site by means of a canister
Liquid fuels expand at high ambient temperatures. To avoid overflowing, the fuel tank must
not be filled to the brim.
The
maximum fill level is indicated on the fuel tank.
Material Funnel
Precondition The machine is standing level.
The machine has cooled down.
The enclosure is open.
All compressed air consumers are disconnected,
the discharge valves are open,
the machine is fully vented, the pressure gauge reads 0 psig.
The negative cable to the battery is disconnected.
The selected fuel meets the requirements specified in Table 49.
1. Loosen and remove the fuel tank cap.
2. Insert the funnel into the filler port.
3. Carefully pour the contents of the canister into the funnel.
4. Do not allow fuel to spill or overflow.
5. Fill the tank to the
maximum fill level marking.
Sufficient expansion volume remains.
6. Remove the funnel.
7. Close the filler port with the cap.
Dispose of any spilled fuel and fuel-contaminated working materials in accordance with appli‐
cable environmental regulations.
Preparing for operation
1. Connect the negative cable to the battery.
2. Close the enclosure.
8
Operation
8.3
Refueling the machine
No.: 902366 10 USE
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M55 PE SIGMA CONTROL SMART pV
75
