3 Safety and Responsibility
3.1 Basic instructions
The machine is manufactured to the latest engineering standards and acknowledged safety regula‐
tions. Nevertheless, dangers can arise through its operation:
■ Danger to life and limb of the operator or third parties,
■ Impairments to the machine and other material assets.
Disregard of warning or safety instructions can cause serious injuries!
➤ Use this machine only if it is in a technically perfect condition and only for the purpose for
which it is intended; observe all safety measures and the instructions in the service manual!
➤ Immediately rectify (have rectified) any faults that could be detrimental to safety!
3.2 Specified use
The machine is intended solely for generating compressed air for industrial use. Any other use is
considered incorrect. The manufacturer is not liable for any damages that may result from incorrect
use. The user alone is liable for any risks incurred.
➤ Keep to the specifications listed in this service manual.
➤ Operate the machine only within its performance limits and under the permitted ambient condi‐
tions.
➤ Do not use compressed air for breathing purposes unless it is specifically treated.
➤ Do not use compressed air for any application that will bring it into direct contact with food
products unless it is specifically treated.
3.3 Incorrect Use
Improper usage can cause damage to property and/or (severe) injuries.
➤ Only use the machine as intended.
➤ Never direct compressed air at persons or animals.
➤ Do not use untreated compressed air for breathing purposes.
➤ Do not allow the machine to take in toxic, acidic, flammable, or explosive gases or vapors.
➤ Do not operate the machine in areas in which specific requirements with regard to explosion
protection are in effect.
3.4 User’s responsibilities
3.4.1 Observe statutory and universally accepted regulations
➤ Observe all relevant statutory and accepted regulations during transportation, operation, clean‐
ing, and maintenance of the machine.
3
Safety and Responsibility
3.1
Basic instructions
No.: 902366 10 USE
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M55 PE SIGMA CONTROL SMART pV
19
