Fig. 24 Filling the tank with the correct fuel type
1
Fuel tank
2
Maximum fill level marking
3
Fuel tank cap
4
Correct fuel type
5
Refuelling label
6
Diesel fuel nozzle
➤ Check the correct fuel type and specifications by referring to Table 49.
Fuel / fuel specification
Designation / standard
Fuel type
Diesel fuel
Recommended fuel specification
EN 590
(1)
Recommended fuel specification
ASTM D975
(2)
(1)
≙ Sales region Europe,
(2)
≙ Sales region USA
Tab. 49 Fuel / fuel specification
Fuel type / specification does not comply with regulations.
➤ Under no circumstances must the fuel tank be filled with the incorrect fuel type.
Further information For more details on the correct fuel specification, see Chapter 2.8.3.
8.3.2 Filling the fuel tank at a pump by means of a refuelling nozzle
Liquid fuels expand at high ambient temperatures. To avoid overflowing, the fuel tank must
not be filled to the brim.
The
maximum fill level is indicated on the fuel tank.
Precondition The machine is standing level.
The machine has cooled down.
The enclosure is open.
All compressed air consumers are disconnected,
the discharge valves are open,
the machine is fully vented, the pressure gauge reads 0 psig.
The negative cable to the battery is disconnected.
The selected fuel meets the requirements specified in Table 49.
8
Operation
8.3
Refueling the machine
74
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M55 PE SIGMA CONTROL SMART pV
No.: 902366 10 USE
