13 Decommissioning, Storage and Transport
13.1 De-commissioning
➤ Follow the instructions in the machine's service manual.
13.2 Packing
➤ Follow the instructions in the machine's service manual.
13.3 Storage
➤ Follow the instructions in the machine's service manual.
13.4 Transporting
➤ Follow the instructions in the machine's service manual.
13.5 Battery removal and disposal
Precondition SIGMA CONTROL 2 is de-commissioned.
1. Disconnect SIGMA CONTROL 2 from all connections.
2. If necessary, use a tool to forcefully remove the rear enclosure panel.
3. If necessary, use a tool to forcefully remove the board from the housing.
4. Use a suitable tool to remove the internally installed battery.
5. Battery disposal in accordance with environmental guidelines.
6. Hand the SIGMA CONTROL 2 over to an authorised disposal expert.
Further information Refer to the machine’s Operating Manual for details regarding the battery’s environmentally sound
disposal.
13 Decommissioning, Storage and Transport
13.1 De-commissioning
No.: 9_9450 12 E
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
235