2. Press «Enter».
The
External message 1 menu is displayed.
4 0 0 m b a r
0 8 : 1 5 A M
8 0 ° C
Header
5.10.2.1 External message 1
Menu
External message 1
Message text
DI1.06
☐
No input assigned
td:
0s ¦ Logic :
+
Logic
DOR1.04
☐
Warning
☑
Message type (operational, alarm, warning)
3. Press «Enter».
The cursor is located at the first character of the message text.
A column with alphanumeric characters is displayed.
The selected character flashes.
4. Select the required character with the «Up» or «Down» keys.
5. Press the «Right» arrow.
The cursor jumps to the next position of the message text.
6. Enter the remaining characters of the message text in the same manner.
7. Press «Enter».
The message text has been entered.
8. Press «Enter».
The setting is applied.
8.8.2.3 Assign and activate the input
1. Use «Up» or «Down» to select the
DI line.
2. Press «Enter».
The display for the currently set input flashes.
3. Use «Up» or «Down» to select the input.
4. Press «Enter».
The setting is applied.
4 0 0 m b a r
0 8 : 1 5 A M
8 0 ° C
Header
5.10.2.1 External message 1
Menu
External message 1
Message text
DI1.07
☐
The output has been selected.
td:
0s ¦ Logic :
+
Logic
DOR1.04
☐
Warning
☑
Message type (operational, alarm, warning)
5. Press the «Right» key.
6. Press «Enter».
The check box assigned to the input flashes.
8
Initial Start-up
8.8
Setting input and output signals
No.: 901700 14 E
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 4.0.X
125
