8 Initial Start-up
8.1 Outline
SIGMA CONTROL 2 was designed and developed for a number of applications. The settings that
can be made are correspondingly varied.
It is possible that only a few of these settings are needed for the initial start-up. This depends on
the application.
8.2: Setting the controller (display format, units, languages, etc.)
8.3: KAESER CONNECT benefits
8.4: Displaying and setting the blower properties
8.5: Machine start and stop
8.6: Operating modes in frequency-controlled machines
8.7: Setting the machine for master control operation
8.8: Setting the external input signal
8.9: Activating remote acknowledgement
8.10: Error behaviour
8.11: Commissioning the machine
8.2 Setting the controller
The following chapters describe in detail the basic settings for the SIGMA CONTROL 2. The
quick installation guide at the beginning of this operating manual provides an overview of the
essential indicator and operating elements, the main menu and important functions.
➤ Perform settings as required:
■ 8.2.1: Selecting a menu item (Introduction)
■ 8.2.2: Setting the language
■ 8.2.3: Noting the user name
■ 8.2.4: Logging in with an RFID Equipment Card
■ 8.2.5: Generating a password
■ 8.2.6: Logging in manually
■ 8.2.7: Setting up the master RFID Equipment Card
■ 8.2.8: Checking/setting the date and time
■ 8.2.9: Setting the time zone (daylight saving time/winter time)
■ 8.2.10: Setting the display formats (date, time, units of pressure and temperature)
■ 8.2.11: Setting the display illumination
■ 8.2.12: Setting the contrast and brightness
■ 8.2.13: Activating the remote control
■ 8.2.14: IP configuration
■ 8.2.15: Setting up the E-mail
■ 8.2.16: Setting the time server
■ 8.3.6: Creating a user account
8
Initial Start-up
8.1
Outline
48
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 4.0.X
No.: 901700 14 E
