7. Use the «Up» or «Down» key to set the month.
8. Press the «Right» key.
The year indicator flashes:
00.00.00.
9. Use the «Up» or «Down» key to set the year.
10. Press the «Enter» key.
The setting is applied accordingly.
11. Press the «Escape» key repeatedly to exit the menu.
8.2.9 Setting the time zone
The time zone in which the machine is to be operated must be set in the SIGMA CONTROL 2, so
as to ensure a timely automatic changeover from winter time (standard time) to daylight saving
time.
Precondition Access level 2 is activated
1. Open the menu 5.1
<Configuration – General>.
2. Using the «Up» or «Down» key, select the line
Date/Time.
3. Press the «Down» key twice.
4 0 0 m b a r
0 8 : 1 5 A M
8 0 ° C
Header
5.1 General
Menu
Model:
XXXXXX
Specified machine type
······························
Date/Time
04/13/22
08:15:37AM
Europe/London
Time zone
······························
4. Press the «Enter» key.
The time zone indicator flashes.
5. Use the «Up» or «Down» key to set the time zone.
6. Press the «Enter» key.
The setting is applied accordingly.
7. Press the «Escape» key repeatedly to exit the menu.
8.2.10 Setting the display formats
The system will automatically adjust the units and the time and date formats based on the selected
language. These settings can be changed manually.
Setting the date format
Set the format for the date indicator:
Format
Example
DD.MM.YY
30.07.16
YY-MM-DD
16–07–30
8
Initial Start-up
8.2
Setting the controller
No.: 901700 14 E
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 4.0.X
57
