Material Protective gloves
Wrench
Hammer
Self-locking hexagon nuts
Precondition The machine is switched off.
The machine is disconnected from the towing vehicle and safely parked.
➤ Ascertain which towing device is fitted to the machine.
6.4.2.1 Option rb/rm/rs
Changing the towing eye/ball hitch on a height-adjustable tow bar
The following alternative tasks must be carried out to change the towing eye or coupling.
Fig. 26 Changing the towing eye (height-adjustable tow-bar)
1
Self-locking hexagon nut
2
Hexagon bolt
3
Draw bar
4
Bellows
5
Ball coupling
6
Towing eye
Remove the ball coupling
Removing the towing eye
1. Unscrew the nuts
1
of both screw connec‐
tions and withdraw the bolts
2
.
2. Remove the coupling
5
from the tow bar
3
.
1. Push the bellows
4
back.
2. Unscrew the nuts
1
of both screw connec‐
tions and withdraw the bolts
2
.
3. Remove the towing eye
6
from the tow
bar
3
.
6
Installation
6.4
Adjusting the chassis
No.: 901765 05 USE
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
61
Option rb/rm/rs
