Fitting the ball coupling
Fitting the towing eye
1. Fit the new ball coupling
5
to the tow bar.
2. Position the various parts so that the bolts
can be freely inserted.
3. Insert the bolts
2
through the correspond‐
ing fixing holes of both screw connections
and secure with new self-locking nuts
1
.
1. Slide the towing eye
6
into or onto the tow
bar
3
.
2. Position the various parts so that the bolts
can be freely inserted.
3. Insert the bolts
2
through the correspond‐
ing fixing holes of both screw connections
and secure with new self-locking nuts
1
.
4. Draw the bellows
4
over the fixings.
6.4.2.2 Option rc/ro/rs, rd/ro/rs
Changing the towing eye/ball hitch on a fixed-height tow bar
The shock absorber is secured in the rear fixing screw. The shock absorber extends automatically.
Use a mounting pin (thin metal rod with ø 0,3–0.4 in) to facilitate the installation.
Material Mounting pin (thin metal pin, ø 0.3–0.4 in)
Self-locking hexagon nuts
Fig. 27 Changing the towing eye/ball hitch (fixed height tow bar)
1
Self-locking hexagon nut
2
Hexagon bolt
3
Shock absorber fixing eye
4
Hexagon bolt
5
Bellows
6
Draw bar
7
Shock absorber
8
Mounting pin
9
Ball coupling
10
Towing eye
6
Installation
6.4
Adjusting the chassis
62
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
No.: 901765 05 USE
Option rc/ro/rs
