■ You can adjust the settings in increments of 0,1 psi or 1 bar.
■ The adjustment is displayed.
Danger from incorrectly set pressure!
Danger from malfunctioning or not functioning compressed air tools when the machine's dis‐
charge pressure is set incorrectly.
➤ Use connected compressed air tools only with the pressure appropriate for its purpose
(tool working pressure).
➤ Comply with the information and notes provided in the compressed air tool's operating
instruction.
The Settings menu for the compressed air discharge pressure can be reached in two ways:
■ Quick access from the main menu
■ Access via menu structure
Precondition Controller switched on
The pressure adjustment option is enabled.
➤ Select the access type.
Quick access from the main menu
Fig. 36 Setting the quick access for the compressed air discharge pressure
1
Setting the compressed air discharge pressure - symbols
2
Setting
1. Press «Up» or «Down» for more than two seconds and release.
The display immediately jumps to the line for "Setting the compressed air discharge pressure".
The Settings menu has a flashing frame.
2. Press the «Up» and/or «Down» keys to select the required pressure.
The set value for the compressed air discharge pressure is immediately active and remains
saved.
3. Press «Enter».
The frame disappears.
4. Press «Enter».
Jump back to the menu bar, the "Main menu" symbol receives a black background.
Access via menu structure
Precondition The Settings menu (hand symbol) is selected.
8
Operation
8.2
Starting and stopping
78
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
No.: 901765 05 USE
