Fig. 68 Tow bar maintenance
1
Handle
2
Transfer cable
3
Lubricating points
4
Greasing points
Fig. 69 Maintaining the fixed height towbar
4
Greasing points
10.8.2.1 Checking the tow bar
1. Check the tow bar for correct function and movement.
2. Clean and oil all sliding and rotating bearings.
Check the height setting of the towbar
➤ Check the towbar height adjustment function.
The locking teeth on the towbar height adjustment joint are corroded and jammed and the
towbar height cannot be adjusted.
➤ If necessary, free the teeth by jerking the towbar horizontally and vertically.
➤ Clean the toothed coupling and smear with water-repellent grease.
Further information See chapter 6.4.1 for towbar height adjustment.
10 Maintenance
10.8 Chassis maintenance
146
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
No.: 901765 05 USE
Option rb/rm/rs
Option rc/ro/rs, rd/ro/rs
Option rb/rm/rs
