8.6.3 Filling the fuel tank on a construction site by means of a canister
Liquid fuels expand at high ambient temperatures. To prevent overflowing, the fuel tanks
must not be filled to the brim.
The
maximum fill level is indicated on the fuel tank.
Material Funnel
Precondition The machine is switched off.
The machine is standing level.
The machine is fully vented, the pressure gauge reads 0 psig.
The machine has cooled down.
All compressed air consumers are disconnected and the air discharge valves are open.
The «battery isolating switch» is switched off.
The selected fuel meets the requirements specified in Table 72.
1. Open the right-hand door.
2. Loosen and remove the fuel tank cap.
3. Insert the funnel into the filler port.
4. Carefully pour the contents of the canister into the funnel.
5. Do not allow any fuel to spill or overflow.
6. Fill the tank to the
maximum fill level marking.
Sufficient expansion volume remains.
7. Remove the funnel.
8. Close the filler port with the cap.
Dispose of any spilled fuel and fuel-contaminated working materials in accordance with appli‐
cable environmental regulations.
Preparing for operation
1. Close the door.
8
Operation
8.6
Refuelling the machine
98
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART
No.: 901783 08 USE