Initial filling of corrosion inhibitor/antifreeze
For the initial filling, the coolant cooler is filled with a mixture of the following liquid components:
Components
Description
Percentages [% vol.]
Corrosion inhibitor/antifreeze KAESER FLUID ENGINE ANTIFREEZE /
(Glysantin
®
G40
®
)
50
Water
50
Tab. 37 Initial filling of engine water cooler
Miscibility with other corrosion inhibitors/antifreeze agents
We do not recommend mixing with different corrosion inhibitors/antifreeze agents even if from the
same manufacturer. This can result in significantly reduced corrosion protection/antifreeze and
may damage the engine cooling system and consequently the engine. Mixtures of different corro‐
sion inhibitors/antifreeze agents generally provide a lower performance than the specially balanced
active components of one coolant type.
Therefore, the use of different corrosion inhibitors/antifreeze agent is only allowed after con‐
sulting with and approval from the engine manufacturer!
2.8.5 Fluid volumes
Description
Fluid volume [gal]
Engine oil
2.90
Fuel
37.00
Coolant
4.22
Tab. 38 Fluid volumes
2.8.6 Batteries
Feature
Value
Voltage [V]
12
Capacity [Ah]
135
PTC testing current [A]
(according to EN 50342)
1000
Tab. 39 Batteries
2
Technical Data
2.8
Engine
16
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART
No.: 901783 08 USE
