Fig. 44 Draining the engine oil
1
Engine block
2
Engine oil sump
3
Floor pan
4
Engine oil drain plug
5
Sealing ring
6
Underside of floor pan
7
Drain hole in the floor pan
1. Open the left-hand door.
2. Remove the oil oil filler cover.
3. Place the oil receptacle below the drain hole in the floor pan.
4. Unscrew the drain plug and allow the engine oil to drain into the receptacle.
5. Clean the drain plug and screw in with a new gasket.
6. Replace the plug in the filler port.
7. Close the door.
Dispose of old oil and oil-soaked working materials according to environmental protection
regulations.
Further information See chapter 10.3.5 for engine oil filling.
10.3.6.1 Option ga
Changing the engine oil
This is done from a oil drain valve with the aid of a separate drain hose.
10 Maintenance
10.3 Engine maintenance
112
Operator manual Portable compressor
M 64
No.: 9_5898 26 E
RAMIRENT
