Fig. 45 Changing the engine oil
1
Generator
2
Engine oil sump
3
Engine oil drain line
4
Oil drain valve
5
Drain hose with quick-release coupling
6
Underside of floor pan
7
Drain hole in the floor pan
Draining the engine oil
1. Open the left-hand door.
2. Remove the oil oil filler cover.
3. Place the oil receptacle below the drain hole in the floor pan.
4. Lay the free end of the drain hose
5
in the receptacle.
5. Remove the protective cap from the oil drain valve
4
.
6. Screw the drain hose with quick-release coupling onto the oil drain valve.
The valve opens and oil drains through the hose.
7. When all the oil has drained out, uncouple and remove the drain hose.
8. Replace the protective cap on the oil drain valve.
9. Replace the plug in the filler port.
10. Close the door.
Dispose of old oil and oil-soaked working materials according to environmental protection
regulations.
Further information See chapter 10.3.5 for engine oil filling.
10 Maintenance
10.3 Engine maintenance
No.: 9_5898 26 E
Operator manual Portable compressor
M 64
113
RAMIRENT
