Precondition The machine mass is known (nameplate).
A suitable forklift truck (designed for the machine mass) is available.
The machine is switched off.
All connecting lines and hoses disconnected and removed.
➤ Comply with all instructions.
12.2.3.1 Preparing for transport
When using a forklift truck to transport a stationary machine with skid-type frame, you must first
drive the forks into the lifting lugs.
NOTICE
Incorrect fork placement can damage the machine.
➤ Insert the lifting forks only into the lifting lugs provided.
Fig. 78 Preparing for transport using a forklift truck
1
Transverse side
2
Skid-type frame design
3
Lifting lugs
4
Forks pushed through lifting lugs
Precondition The machine is parked on even ground.
1. Close and lock the access doors.
2. Position the forklift truck to the transverse side of the machine with the forks opposite to the
lifting lugs.
3. Align the forks with the machine's lifting lugs.
4. Carefully drive the forks over the full length through the lifting lugs.
Result Forks are driven over the full length through the lifting lugs.
12 Decommissioning, Storage and Transport
12.2 Transport
200
Operator manual Portable compressor
M 64
No.: 9_5898 26 E
Option rw
RAMIRENT
