3.8.4 Do not exceed the maximum supply system load
➤ When operating the generator, do not exceed the maximum supply system load due to con‐
nected consumers.
Bear in mind:
■ The power consumption values of simultaneous consumers are added.
■ The maximum continuous power loading on the generator by the connected consumers is limi‐
ted by the safety cut-out.
3.8.5 Perform regular generator inspections
To ensure a safe operation, the machine must be subjected to regular inspections.
Daily inspection prior to activating the device by authorised operating personnel:
➤ Insulation monitor function check.
Annual inspection by trained and authorised electrician:
➤ Inspect the generator and generator control cubicle for mechanical damages.
➤ Inspect the protective conductor.
➤ Measure the dielectric resistance.
➤ Measure the substitute leakage current.
➤ Test the generator functionality.
➤ Test the proper functioning of the generator fan and clean, if required.
➤ Clean the cooling air openings.
➤ Check and tighten the screw connections at the generator and the generator control cubicle.
➤ Check covers and power socket caps for damage and good sealing.
➤ Check the completeness of labeling and warning labels.
3.9 Emergencies
3.9.1 Correct fire fighting
Suitable measures
Calm and prudent action can safe lives in the event of a fire.
➤ Keep calm.
➤ Give the alarm.
➤ Shut down the machine from the instrument panel if possible.
➤ Warn and move endangered personnel to safety.
➤ Help incapacitated persons.
➤ Close the doors.
➤ When trained accordingly: Attempt to extinguish the fire.
3
Safety and Responsibility
3.9
Emergencies
No.: 9_5898 26 E
Operator manual Portable compressor
M 64
37
RAMIRENT
