Fig. 9 Principle tool lubricator
1
Compressed air inlet
2
Oil tank
3
Tool oil outlet
4
Tool lubricator upper part with oil filling port
5
Filler plug with dipstick and integrated riser
tube
6
Metering knob
Points to be observed with separate compressed air lines:
NOTICE
Lubrication with tool oil.
Air tools that must not be lubricated can be damaged.
➤ Blow any residual oil out of the line before connecting such an air tool.
4.6.2 Option ba
Low temperature equipment options
Special equipment is provided for operation in extremely low temperatures.
This equipment assures trouble-free operation in ambient temperatures from -25 °C to +50 °C.
The electrical system starts the engine without problem at ambient temperatures down to -20 °C.
4.6.2.1 Option bb
Coolant pre-heating
The engine coolant can be pre-heated to improve starting under cold conditions.
The power supply to the coolant pre-heater takes place via a separate network connector. A flexi‐
ble power cable (supplied) connects the machine's power plug to the user's power socket.
The coolant pre-heater works according to the principle of self-circulation.
4
Design and Function
4.6
Options
No.: 9_5898 26 E
Operator manual Portable compressor
M 64
49
Option fc
RAMIRENT
