Shutting down the machine:
1. Switch off the «Controller On» switch.
2. Close the door.
Secure both doors with locks as necessary.
8.3 Ending the reverse engine run
Engine backfiring causes a short turning of the engine in the opposite direction. This backfiring can
trigger the expulsion of exhaust gas into the intake end which may cause a fire.
If the engine runs in reverse, it must be shut down immediately because the oil circuit is interrupted
potentially causing mechanical damage.
Characteristics of a reverse engine run
■ Oil pressure drops significantly.
■ Oil pressure switch indicates insufficient oil pressure.
■ Exhaust gases escape from the air filter.
■ The knocking sound of the engine becomes audibly louder.
CAUTION
Reverse engine run
Mechanical damage from interrupted oil circuit.
➤ Shut down the machine immediately.
1. Shut down the machine immediately.
2. Check the air filter.
3. Check the suction pipe.
4. If necessary, replace the components.
8.4 Option ua
Using the hose reel
The machine is fitted with an compressed air extension hose.
A hose reel is provided for safe storage of this hose.
➤ Check which hose reel is fitted to your machine.
8.4.1 Using the hose reel (EC version)
The hose reel is on the front of the machine.
8
Operation
8.3
Ending the reverse engine run
74
Operator manual Portable compressor
M 64
No.: 9_5898 26 E
RAMIRENT
