Fig. 43 Checking the engine oil level
1
Oil filler neck cover, engine oil
2
Dipstick
A
Mark for
maximum oil level
B
Mark for
minimum oil level
1. Open the right-hand access door.
2. Withdraw the dipstick, wipe with a lint-free cloth and replace fully.
3. Withdraw the dipstick once more and read off the oil level.
The level should be between the maximum and minimum markings.
Top up if the level has reached or fallen below the
minimum level mark.
4. Close the access door.
The marked
maximum oil level should not be exceeded in order for the level of oil in the
crankcase not to reach the crankshaft. If this were to occur, it could create oil bubbles that
would reduce the oil's lubricating capability and impair engine performance.
10.3.5 Engine oil filling and topping up
Material Engine oil
Cleaning cloth
Funnel
Precondition The machine is shut down.
The machine is standing level.
The machine is fully vented, the pressure gauge reads 0 bar.
All compressed air consumers are disconnected and the air outlet valves are open.
The negative cable to the battery is disconnected.
Filling with engine oil
See chapter 2.7.5 for engine oil filling volume.
The oil dipstick is marked with the «maximum oil level».
1. Open the right-hand access door.
2. Remove the filler cap and fill with fresh oil.
10 Maintenance
10.3 Engine maintenance
110
Operator manual Portable compressor
M 64
No.: 9_5898 26 E
RAMIRENT
