2 Technical Specification
2.1 Nameplate
The model designation and important technical information are given on the machine's nameplate.
The nameplate is located on the outside of the machine (see illustration in chapter 13.1)
➤ Enter the data from the nameplate here as a reference.
Characteristic
Value
Vehicle identity no.
Permissible total weight
Permissible axle load
Permissible coupling load
Compressor model
Material number
serial number
Year of manufacture
Total weight
Lifting point load capacity
Rated engine power
Engine speed
Maximum working pressure
Tab. 2 Nameplate
2.2 List of Options
A list of the options fitted to your machine helps to relate the information in this service manual.
A list of options fitted is given as code letters on the right side of the coupling load / options label.
The label is to be found
■ on the outside of the machine
■ on the front (see chapter 13.1)
The following table lists all possible options.
Only the codes for those options fitted appear on the label.
2
Technical Specification
2.1
Nameplate
No.: 9_6975 00 E
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
3
