5. If the locking indicator is not visible:
■ Press down on the coupling until the closing mechanism can be heard to lock into place.
■ Press down on the release lever
7
to bring it to the horizontal position.
6. Check again that the locking indicator
6
is showing green.
The coupling is locked closed when the locking indicator shows green.
Carry out the following before starting to tow
1. Check that the coupling is properly latched onto the towing hitch.
2. Check that the towbar is adjusted to the correct height. See also chapter 6.3.
Check that:
■ The teeth in the tow bar height adjusting joints are fully engaged
■ The locking levers are tightened
■ The split pin is fully inserted.
3. Wind the support full up.
4. Check that the wheels are securely fitted and the tyres are in good condition.
5. Check the tyre pressures.
6. Connect the cable for the lighting and indicator systems and carry out a function check.
7. Remove the chocks.
Carry out the following before starting to tow
1. Check that the coupling is properly latched onto the towing hitch.
2. Check that the towbar is adjusted to the correct height. See also chapter 6.3.
Check that:
■ The teeth in the tow bar height adjusting joints are fully engaged
■ The locking levers are tightened
■ The split pin is fully inserted.
3. Wind the jockey wheel to its uppermost position.
4. Check that the wheels are securely fitted and the tyres are in good condition.
5. Check the tyre pressures.
6. Connect the cable for the lighting and indicator systems and carry out a function check.
7. Release the parking brake and remove the chocks from under the wheels.
Carry out the following before starting to tow
1. Check that the coupling is properly latched onto the towing hitch.
2. Wind the jockey wheel to its uppermost position.
3. Check that the wheels are securely fitted and the tyres are in good condition.
4. Check the tyre pressures.
5. Connect the cable for the lighting and indicator systems and carry out a function check.
6. Release the parking brake and remove the chocks from under the wheels.
12 Decommissioning, Storage and Transport
12.2 Transporting
No.: 9_9432 02 E
Service Manual Screw Compressor
M43
197
Option sa
Option sb
Option sd, se
RAMIRENT
