2. Position the receptacle.
3. Unscrew and remove the engine sump drain plug
5
.
4. Open the shut-off valve
2
and drain the oil into the receptacle.
10.3.4.2 Changing the engine oil filter
Material Spares
Common tools
Cleaning cloths
Receptacle
Precondition The machine is shut down.
The machine is fully vented, the pressure gauge reads 0 bar.
Engine cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.
CAUTION
Danger of burns from hot components and escaping engine oil!
➤ Wear long-sleeved clothing and gloves.
Fig. 30 Changing the engine oil filter
1
Engine oil filter
2
Direction of rotation to unscrew the filter
3
Engine
4
Oil dipstick
1. Raise the canopy.
2. Prepare a receptacle.
3. Note the direction of rotation
2
to unscrew the filter.
4. Unscrew the filter
1
. Catch any escaping oil.
5. Carefully clean sealing surfaces using lint-free cloth.
6. Lightly oil the new filter's gasket.
7. Turn the oil filter clockwise by hand to tighten.
8. Check the engine oil level.
Top up if the level is too low.
9. Close the canopy.
Further information The engine service manual gives further information on oil filter changing.
10 Maintenance
10.3 Engine
84
Service Manual Screw Compressor
M43
No.: 9_9432 02 E
RAMIRENT
