3 Safety and Responsibility
3.1 Basic instructions
The machine is manufactured to the latest engineering standards and acknowledged safety regula‐
tions. Nevertheless, dangers can arise through its operation:
■ danger to life and limb of the operator or third parties,
■ damages to the machine and other material assets.
Disregard of warning or safety instructions can cause serious injuries!
➤ Use this machine only if it is in a technically perfect condition and only for the purpose for
which it is intended; observe all safety measures and the instructions in the operator manual.
➤ Immediately rectify (have rectified) any faults that could be detrimental to safety!
3.2 Specified use
The machine is intended solely for generating compressed air for industrial use. Any other use is
considered incorrect. The manufacturer is not liable for any damages that may result from incorrect
use. The user alone is liable for any risks incurred.
➤ Keep to the specifications listed in this service manual.
➤ Operate the machine only within its performance limits and under the permitted ambient condi‐
tions.
➤ Do not use compressed air for breathing purposes unless it is specifically treated.
➤ Do not use compressed air for any application that will bring it into direct contact with food
products unless it is specifically treated.
3.3 Improper use
Improper usage can cause damage to property and/or (severe) injuries.
➤ Only use the machine as intended.
➤ Never direct compressed air at persons or animals.
➤ Use hot cooling air for heating purposes only if there is no risk to the health of humans or ani‐
mals. If necessary, hot cooling air should be treated by suitable means.
➤ Do not allow the machine to take in toxic, acidic, flammable of explosive gases or vapors.
➤ Do not operate the machine in areas in which specific requirements with regard to explosion
protection are in force.
3.4 User's Responsibilities
3.4.1 Observe statutory and universally accepted regulations
This is, for example, nationally applied European directives and/or valid national legislation, safety
and accident prevention regulations.
➤ Observe relevant statutory and accepted regulations during installation, operation and mainte‐
nance of the machine.
3
Safety and Responsibility
3.1
Basic instructions
12
Operator Manual Screw Compressor
SM Tri-Voltage, SIGMA CONTROL 2
9_5875 33 USE
