Ɣ&)PRGH
-13-
One key to return
When in CF mode, press the “one key to return” key, the quadcopter will fly
towards the operator. Press this key again or push up the right control stick to
exit this function.(To make a safe return, push the right control stick to left/right
if the quadcopter’ s return deviates to right/left).
CF mode:
([LWWKH&)PRGH
$GMXVWWKHGLUHFWLRQLQ&)PRGH
After matching of the quadcopter and the remote control, press the CF mode
button on the remote control, the buzzer in the remote control makes the
sound "di", the lights of the quadcopter change from constantly on to flickering,
the quadcopter turns in CF mode.
When the quadcopter is in CF mode, press the CF mode button on the remote
control, the buzzer makes the sound “di” , the lights of the quadcopter change
from flickering to constantly on, the quadcopter exit the CF mode.
When the quadcopter is in CF mode, it is necessary to adjust the direction first.
Make sure the front of the quadcopter points ahead in the same direction of the
operater(figure.1), then push the left and right control stick to the lower left
direction at the same time for about 2 seconds(figure.2), the indication lights of
the quadcopter change from slowly flickering to fast flickering for 2 seconds,
which means the direction adjustment is finished.