background image

-14-

&RQWUROWKHGLUHFWLRQVLQ&)PRGH

In CF mode, the forward direction is the direction which the quadcopter 
pointed to in the previous step. The operator should face this forward direction, 
otherwise the direction will not in the correct control. Please follow the below 
steps:

+LQWV

1. To make the quadcopter flying in CF mode, a direction adjustment and 
    confirmation step is important, and the operator should face the direction to 
    which the front of the quadcopter pointed. The orientation of the operator 
    should not change to avoid effect on controlling the quadcopter.
2. When in CF mode, if the direction of the quadcopter is not in accordance with 
    the operator or makes deviation, please stop flying to make a readjustment and 
    confirmation of the direction.

Push the right control stick up, 
the quadcopter flies forward 
based on the direction which 
the operator faced in the 
adjustment step.

Push the control stick to make 
right side fly, the quadcopter 
will make right side fly based on 
the direction which the operator 
face in the adjustment step.

Push the control stick to make 
a right turn, the quadcopter will 
turn right based on the direction 
which the operator faced in the 
adjustment step.

Push the control stick to make 
a left turn, the quadcopter will 
turn left based on the direction 
which the operator faced in the 
adjustment step.

Push the right control stick 
down, the quadcopter flies 
backwards based on the 
direction which the operator
 faced in the adjustment step.

Push the control stick to make 
left side fly, the quadcopter 
will make left side fly based on 
the direction which the 
operator faced in the 
adjustment step.

Figure

1

Figure

2

Summary of Contents for K70 Sky Warrior



















Reviews: