background image

6RIWZDUHLQVWDOODWLRQ

6PDUWSKRQHSDGWDEOHWKDUGZDUH VRIWZDUHLQVWDOODWLRQ

Two-dimension code is provided on color box packing and back cover of 
specification to scan.

Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’ s authority to operate the
equipment.

NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
   the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

QR code for google play  QR code for IOS

QR code for 360

Summary of Contents for K70 Sky Warrior



















Reviews: