background image

Page 8 of 16

2019

/09

/11

K&K Single point swing # 040720001

Instructions for professional inspection and maintenance of single-point 

swings

Playground equipment is subject to a wide range of stresses and strains over the course 

of its useful life, which can reduce or even eliminate the original safety. Regular in-
spection and maintenance ensures that the required safety of playground equipment is 
maintained.
This maintenance manual contains all the instructions needed to perform the inspec-
tion tasks and to comply with the inspection periods. It is assumed in this maintenance 
manual that the playground equipment is installed in a normally frequented playg-
round in normal surroundings. If there are local factors that deviate from the normal, 

the inspection periods must be adjusted. This may cause the time intervals specified by 

the manufacturer / distributor to be shortened. An extension of the time intervals is 
excluded as these are minimum requirements.
Among the local factors that require shortening of the inspection periods are, for 
example, locations with heavy use, e.g. schoolyards, kindergartens, amusement parks, 
location with high levels of vandalism, locations near the coast, locations with air pol-
lution, playground equipment increasing age.
Furthermore, this maintenance manual assumes that the described inspections and 

maintenance work will be carried out by personnel with suitable qualifications. Certain 
tasks (such as welding) can only be performed by qualified professionals or require ma

-

chining by the manufacturer / distributor.
The owner / operator of the playground should set up a suitable inspection plan for the 
playground and document the inspections and maintenance performed there for the 
particular playground equipment.

K&K Single point swing # 040720001 - Instruction

Kaiser & Kühne Freizeitgeräte GmbH
Im Südloh 5 - 27324 Eystrup

 +49 4254 93150

 info@kaiser-kuehne-play.com

Summary of Contents for Pendulum Swing

















Reviews: