EN
THETA
DRONE
| User Guide
20
HEADLESS MODE
Headless Mode allows you to control the Drone relative to its direction from the take-off
location.
This means you can fly the drone without worrying which direction it is facing.
Before you use Headless Mode, ensure the Drone’s Direction/Heading is facing away
from the pilot/operator and you calibrate the drone using the following steps:
CALIBRATION:
1.
Push the Left Throttle/Yaw Stick and the Right Pitch/Roll Stick to the bottom left and
hold for 2 seconds until you see the LED indicator lights on the drone start to flash
rapidly.
2.
Release the sticks and wait for the Drone LEDs to stop flashing.
3.
The Drone LEDs will stop flashing indicating that the calibration has been completed.
To enable Headless Mode simply press the Headless Mode Button on the Transmitter.
To avoid confusion, you should ensure the controls are correct from take-off. You should
arm the Drone while you are standing behind it, so that both you and Drone are both
facing in the same direction. Failure to do this will result in incorrect control.
Tip: Headless Mode can be turned on while in flight.
Forward
Forward
NORMAL MODE
HEADLESS MODE
THET
A
DRONE
HD 7
20P QU
ADC
OPTER
KAISER BA
AS
THETA DRONE
HD 720P QUADCOPTER
K
AISER BA
A
S
Summary of Contents for THETA
Page 1: ...THETA DRONE USER GUIDE ...
Page 2: ......
Page 3: ...Languages English 4 25 Français 26 49 Espańol 50 74 ...