FLIGHT MODES
19 - ENG
Speed Modes
There are 2 Speed modes on the Trail Drone.
They can be cycled through on the Remote
Control Transmitter by pressing the Speed Mode
Button. Each mode is indicated by an increasing
series of beeps.
Mode 1-Beginner Mode
This is the default operating mode that the
Trail Drone initializes in. Please ensure that you
use this mode in a large open space with no
obstacles. The sensitivity is very low and is
suitable for beginner pilots. It is less responsive
and more forgiving.
Mode 2-Pro Mode
To enable this mode, press the Speed Mode
Button TWICE. The Remote Control Transmitter
will beep three times indicating you are in Pro
Mode. This is the most responsive and fastest
mode the Drone can operate in.
This is only recommended for pilots with
experience flying the Drone. Headless Mode
allows you to control the Drone relative to its
direction from the take-off location. This means
you can fly the Drone without worrying which
direction it is facing. Before you use Headless
Mode, ensure the Drone’s Direction/Heading is
facing away from the pilot/operator.
FLIGHT MODES
20 - ENG
Headless Mode
To enable Headless Mode, simply press the
Headless Mode Button on the Remote Control
Transmitter as indicated in the diagram. You will
hear a short beep and the drone light will start
flashing.
To avoid confusion, you should ensure the
controls are correct from take-off. Headless Mode
can be turned on while in flight. You should arm
the Drone while you are standing behind it, so
that you and Drone are both facing in the same
direction. Failure to do this will result in incorrect
control.
Normal Mode
Headless Mode
