Kaiser Baas WiFi Photo & Document Scanner, User Manual

23

22

From Windows devices

1.  Press

 iScan Air

 app. Swipe in from the right side or move the cursor 

to the upper-right or lower-right of your device’s screen to reveal the 
menu bar, then select the 

Calibrate

 setting

2.  Remove the plastic foil on the calibration card, insert it in the feed slot 

with the arrow mark facing up and pointing to scanner

3.  Press 

Calibrate

 button

     The calibration card will automatically feed into the scanner, and the 

WiFi LED indicator will blink pink on the scanner. Wait until the card is 
ejected completely. A ‘

Calibration done

’ message will appear on the 

app. Select 

Close 

button

4.  If lines still appear, clean the roller and clean the lens then repeat 

calibration procedure.

CALIBRATION

From Apple Mac

1.  Press 

 iScan Air

 app. Press the 

Settings

 at the top-left corner of the 

Mac’s screen to reveal the menu, then select the 

Calibrate 

setting

2.  Remove the plastic foil on the calibration card, insert it in the feed slot 

with the arrow mark

3.  Press the 

Calibrate

 button

      The calibration card will be pulled into scanner, and the WiFi LED 

indicator will blink pink light during calibrating. Wait until the calibration 
card is ejected with a ‘

Calibration done.

’ message. Press the

 OK

 button

4.  If lines still appear, clean the roller and clean the lens then repeat 

calibration procedure.

MacBook Pro

CALIBRATION

Note:

 It’s advised to do a calibration procedure periodically

Note:

 It’s advised to do a calibration procedure periodically.