Kaiser Baas WiFi Photo & Document Scanner, User Manual

25

24

From Windows phone devices

1.  Press 

iScan Air 

app. Press the settings icon at the bottom-right 

corner to reveal the menu, then select the

 Calibrate

 setting

2.  Remove the plastic foil on the calibration card, insert it in the feed slot 

with the arrow mark facing up and pointing to scanner

3.  Press

 Calibrate 

button

     The calibration card will be pulled into scanner, and the  

WiFi LED indicator will blink pink light during calibrating. Wait until the 
calibration card is ejected with a 

‘Calibration done.’

 message, then 

press the

 ok

 button

4.  If lines still appear, clean the roller and clean the lens then repeat 

calibration procedure.

CALIBRATION

Dirt and stains can build up on the scanner’s rollers and affect image quality, 
clean the scanner’s rollers periodically to get the best result. Use the 
cleaning board included with scanner to clean rollers

From iPad, iPhone and iPod touch

1.  Press

 iScan Air

 app. Press the  

Settings

   at the top-right corner of 

the app to reveal the menu, then select the

 Clean 

setting

2.  Hold the foam strip of cleaning board facing down, gently insert it into 

the feed slot

3.  Press the

 Clean

 button

4.  The cleaning board will be pulled into scanner, and the WiFi LED 

indicator will blink pink light during cleaning. Wait until the cleaning 
board is ejected with a 

‘Cleaning done.’

 message. Press the 

OK 

button

CARE - CLEAN ROLLERS

POWER

A8

A6

A4

Note:

 It’s advised to do 

a calibration procedure 
periodically.

Note:

 Advisable to 

clean rollers periodically 
using this procedure.