34
EN
NOTE: The Wrist Remote must be fully charged before
it is paired. Charging takes an hour or so, using the Micro
USB cable provided.
1.
Make sure the X150 is turned off.
2.
Press and HOLD the RECORD Video & SHOOT Photo
buttons on the Wrist Remote together, for 3 seconds,
then release.
3.
Turn the X150 on
4.
A blue light will appear on the Wrist Remote once the
pairing is complete.
NOTE: Once paired, the X150 will recognise
the Wrist Remote automatically.
Wrist Remote LED Indicators
Flashing Green: Video is being recorded. This light will also
appear when an image is being captured.
KB TIP: You can check the battery status of the Wrist Remote by pressing Image
Capture button (located between the LED lights and Red button) when the X150 is
OFF. If the Wrist Remote has charge in it, the green light will flash.
Solid Blue Light : This indicates that the X150 and the Wrist