10
EN
•Install the refrigerator on a perfectly
even and firm surface. When
aligning the refrigerator, its doors
must be closed.
• Use a level with a glass scale and a
bubble to make sure that the
refrigerator is in a level position; all
four legs must stand firmly on the
floor.
• If the refrigerator needs adjustment,
carefully tilt it and turn the front
adjustable leg until the refrigerator is
in the required position.
• Alignment of the refrigerator pre-
vents its displacement, vibration and
other issues.
• Do not replace the original aligning
legs with other legs.
• Wait at least 2 hours before plugging
the refrigerator in; this will help
ensure fault-free operation.
• After the product has been installed,
make sure that it is not standing on a
power cable;
• Alteration of device parts is prohib-
ited. Avoid damaging the capillary
tube visible in the rear wall recess for
the compressor. The capillary tube
must not be bent, unbent or twisted.
Damage to the refrigerator's capil-
lary tube will void the warranty!
• T
o ensure unhampered opening of
the refrigerator's door, there must be
10 cm clearance between the side of
the refrigerator (from the door hinge)
and the wall of the room where it has
been installed.
≥ 30 cm
≥ 30 cm
≥ 1
0 c
m
≥ 1
0 cm
≥ 10 cm
≥ 10 cm
